Radius Networks

How do I turn on/off my beacon?

The procedure for turning on/off your beacon or getting your beacon into configurable mode varies by the beacon model type. Follow the instructions for your beacon model as described below.

 

RadBeacon USB

Configurable mode can be re-initiated for RadBeacon USB beacons by removing and restoring power to the device. When a USB beacon is plugged into a power-source, it stays in configurable mode for 30 minutes. After 30 minutes, it will no longer be in configurable mode unless you unplug it and plug it back in.

To turn your USB beacon on, simply plug it into a power-source.

 


RadBeacon Dot

The RadBeacon Dot is equipped with a button that is accessed by pressing on the silicone cap of the unit. When the beacon is ON and advertising, press and hold for about 5 seconds until you see a double green flash. For specific details on RadBeacon Dot operating modes and how to initiate configuration mode see this article.

 


 

RadBeacon X4

The RadBeacon X4 beacon has several operating modes.

  • OFF - No advertisements are being transmitted. Your beacon is off.
  • ON - Proximity advertisements are being transmitted.
  • CONFIGURABLE - Beacon is discoverable and connectable by a valid configuration app like RadBeacon for iOS, Android or OS X.

Your beacon is shipped in the OFF mode.

When the batteries are in it will be in the ON mode and it will not exit the ON state until the batteries are removed or die.

Once you've inserted 2 of the 4 AA batteries (included) the device will start to FLASH GREEN. This indicates it's in the CONFIGURABLE state and you can find it in RadBeacon.

The CONFIGURABLE state will last about 10 minutes, if you ever need to restart that window for any reason, just push the blue button inside the case.

Using the RadBeacon app for iOS, Android or OS X, scan for configurable beacons and follow the instructions for selecting and configuring your beacon, which can be found at this link.

https://radiusnetworks.zendesk.com/hc/en-us/sections/200458584-RadBeacon-Config-App

When you have finished configuring your beacon, you can exit CONFIGURABLE mode and return to ON mode by pressing the blue button on the beacon once so that you see a SINGLE GREEN FLASH

Have more questions? Submit a request

Comments

Powered by Zendesk